Durum USA
DURMAT® composite rods are tungsten carbide formed in a nickel/silver matrix. Durum USA offers rods with larger carbides for cutting applications as well as smaller carbides for wear applications. Durmat® composite rods are applied to most metallic surfaces using an oxy/fuel torch and a flux powder.
1 - 15 of 15 | Results Per Page | View | Unit of Measure
1 

Item #

Size

Composition

Grade

CR Wear 40-60 N/A 40 to 60 N/A Nickel-Silver, 60% WC N/A Wear
CR Wear 10-18 N/A 10 to 18 N/A Nickel-Silver, 60% WC N/A Wear
CR Wear 1/8 x 1/16 N/A 1/8 x 1/16 in N/A Nickel-Silver, 60% WC N/A Wear
CR Wear 3/16 x 1/8 N/A 3/16 x 1/8 in N/A Nickel-Silver, 60% WC N/A Wear
CR Wear 1/4 x 3/16 N/A 1/4 x 3/16 in N/A Nickel-Silver, 60% WC N/A Wear
CR Wear 5/16 x 1/4 N/A 5/16 x 1/4 in N/A Nickel-Silver, 60% WC N/A Wear
CR Wear 3/8 x 5/16 N/A 3/8 x 5/16 in N/A Nickel-Silver, 60% WC N/A Wear
CR Wear 1/2 x 3/8 N/A 1/2 x 3/8 in N/A Nickel-Silver, 60% WC N/A Wear
CR Cut 1/8 x 1/16 N/A 1/8 x 1/16 in N/A Nickel-Silver, 70% WC N/A Cutting
CR Cut 3/16 x 1/8 N/A 3/16 x 1/8 in N/A Nickel-Silver, 70% WC N/A Cutting
CR Cut 1/4 x 3/16 N/A 1/4 x 3/16 in N/A Nickel-Silver, 70% WC N/A Cutting
CR Cut 5/16 x 1/4 N/A 5/16 x 1/4 in N/A Nickel-Silver, 70% WC N/A Cutting
CR Cut 3/8 x 5/16 N/A 3/8 x 5/16 in N/A Nickel-Silver, 70% WC N/A Cutting
CR Cut 1/2 x 3/8 N/A 1/2 x 3/8 in N/A Nickel-Silver, 70% WC N/A Cutting
CR Flux N/A N/A Flux Powder N/A
1 - 15 of 15 | Results Per Page | View | Unit of Measure
1